GST NO: 24BGZPM5003P1ZR

Construcition Chemicals

Polycarboxylate Ether Powder

Properties:
The power packed (COOH) moiety is absorbed on hydrating cement grain in much greater amount than conventional superplasticizer, resulting excellent fluidity and yielding a Rheoplastic & Self Compacting Concrete (SCC) at low water cement ratio. Due to steric-hindrance effect imparted by ether-function hydrophilic chain attached to polymer, superior slump (workability) retention is achievable by use of PCE. PCE is compatible with lingo base plasticizer. Do not use blending with SNF base plasticizer. PCE is the main raw material for concrete admixture, which improves water reducing abilities. We provide first rate products through continuous quality control and usage development.

Advantage:
High water reducing ability.
Easy to use any cement grade.
Improve concrete setting time.
Produces cohesive and non-segregating concrete mixtures.
Small dosage level.
Low concrete viscosity.
Increase compressive and flexural strength of concrete at all ages.
More than 30 % water reduction in high performance concrete.
Linear water reduction throughout the recommended dosage.
Faster recycle of formwork owing to accelerated early strength development.
Close textured fair faced smooth concrete.
Rheoplastic self-leveling and self compacting concrete.
Economical concrete design.

Polycarboxylate Ether Liquid 40%

Properties:
The power packed (COOH) moiety is absorbed on hydrating cement grain in much greater amount than conventional superplasticizer, resulting excellent fluidity and yielding a Rheoplastic & Self Compacting Concrete (SCC) at low water cement ratio. Due to steric-hindrance effect imparted by ether-function hydrophilic chain attached to polymer, superior slump (workability) retention is achievable by use of PCE. PCE is compatible with lingo base plasticizer. Do not use blending with SNF base plasticizer. PCE is the main raw material for concrete admixture, which improves water reducing abilities. We provide first rate products through continuous quality control and usage development.

Advantage:
High water reducing ability.
Easy to use any cement grade.
Improve concrete setting time.
Produces cohesive and non-segregating concrete mixtures.
Small dosage level.
Low concrete viscosity.
Increase compressive and flexural strength of concrete at all ages.
More than 30 % water reduction in high performance concrete.
Linear water reduction throughout the recommended dosage.
Faster recycle of formwork owing to accelerated early strength development.
Close textured fair faced smooth concrete.
Rheoplastic self-leveling and self compacting concrete.
Economical concrete design.

Sulphonated Naphthalene Formaldehyde Condensate Powder

We have following grade of SNF Powder :
1. SNF Powder (Sodium sulphate 2%)
2. SNF Powder (Sodium sulphate 5%)
3. SNF Powder (Sodium sulphate 10%)
4. SNF Powder (Sodium sulphate 19-20%)

Application:
Construction industry: High Range water reducer in concrete. Water reduction in concrete up to 20 %. Higher slump with lower water – cement ratio. Flow able & pump able concrete with improved rheology. Possess homogeneous, free from Honeycombing and dense concrete. High strength due to reduced water – cement ratio.

Sulphonated Melamine Formaldehyde Condensate Liquid 40%

Properties:
SMF Liquid is a very sensitive product. Therefore it must be stored in its original sealed packaging. If stored properly in its original sealed packaging the shelf life is at least 6 months.

Application:
SMF Liquid is an excellent dispersing agent for cement particles and extensively used in concrete, mortars and self-leveling compositions. It promotes fine dispersion with controlled theological behavior of cementitious compositions ensuring for extended work ability. Good liquefying agent for concrete & mortar mixes.

Sulphonated Melamine Formaldehyde Condensate Powder

Properties:
SMF Powder is easy to absorb the moisture from the air, so it must be kept in the original sealed bag and stored at the dry place. If stored properly in its original sealed packaging the shelf life is at least 6 months.

Application:
SMF Powder is an excellent dispersing agent for cement particles and extensively used in concrete, mortars and self-leveling compositions. It promotes fine dispersion with controlled theological behavior of cementitious compositions ensuring for extended work ability. Good liquefying agent for concrete & mortar mixes.

Special feature:
High strength concrete, high fluidity concrete, high duration concrete, aluminate cement refractory concrete, low cement refractory concrete, steam curing
High strength mortar, gypsum products, self-flowing ground, stuffing materials, grouting materials.
Specifically designed as an admixture for manufacture of white cement/concrete tiles
Be used as the brightened agent for manufacturing the colored road brick and the tunnel liner.